Resume example and regional guide
Top Tradie Resume Template for Australia Job Seekers
Tradie resume example
A contractor in Sydney, a plumber in Perth and an electrician in Brisbane each answer to a different regulator, with different licence names and different recognition rules. This national guide is for tradies who chase work across borders, FIFO workers and anyone moving interstate. It maps the main regulators, explains what travels and what does not, and shows how to write each credential so any state's coordinator can place it. For detail on a single state, use the NSW, Victoria, Queensland or Western Australia pages.
Hannah Cole
Tradie
Professional Summary
Plumber and gasfitter with 10 years' experience across Victoria and Western Australia, including FIFO plant maintenance and Melbourne residential work. Holds licences in both states, a current construction induction card and a clean safety record. Available for rosters and short-term contracts.
Experience
Maintenance Plumber (FIFO)
2023 - PresentOutback Mechanical Services
- Maintain water and drainage systems at a remote camp and processing site on an 8:6 roster.
- Complete planned shutdown tasks including pipe replacement and valve overhaul.
- Document work to the client's permit and isolation procedures.
- Mentor two apprentices on site-specific safety.
Plumber and Gasfitter
2018 - 2023Yarra Bend Plumbing Group
- Completed bathroom and kitchen plumbing for 80 terrace and apartment renovations.
- Installed and certified gas appliances and issued compliance paperwork.
- Supervised apprentices and managed parts orders.
Plumbing Apprentice
2013 - 2018Northern Suburbs Plumbing
- Assisted with roofing, drainage and hot water installations under supervision.
- Completed Certificate III in Plumbing while employed.
Education
Skills
Regional Formatting Standards
National tradie resumes in Australia should be two A4 pages. Group credentials by state and regulator, give expiries, state your White Card year and your recognition route for any interstate work, and end with referees.
Match each credential to the right state regulator
For electrical work, NSW uses licences and certificates managed through Building Commission NSW and Service NSW, Victoria uses Energy Safe Victoria, Queensland uses the Electrical Safety Office, and Western Australia uses the Electrical Licensing Board. Name the issuer in full on every line rather than writing a generic 'electrical licence', because the same words mean different things in different states.
The same applies to plumbing and building. Victoria's building and plumbing practitioners notify the Building and Plumbing Commission, Queensland uses the QBCC for plumbing, drainage and gas work of any value, and WA's plumbers come under the Plumbers Licensing Board. If you hold licences in two states, list them as separate lines with state and expiry.
“Electrician's Licence (A Grade) - Energy Safe Victoria - Lic. No. 000000 | Electrical Work Licence, Queensland - applied 09/2026”
How the White Card travels between states
NSW says construction workers can work with construction induction cards issued by other states and territories, and WA regulations recognise nationally accredited induction training done elsewhere. Only the NSW and WA pages confirm interstate recognition; WorkSafe Victoria's page is silent on it. Each state also has its own issuing process: WorkSafe Victoria requires a face-to-face course of at least six hours, Queensland and WA cards are issued by the training organisation, and NSW applications go to SafeWork NSW.
NSW and WA both say the card lapses if you have not done construction work for two consecutive years. If you are returning to the trade after a break, say when you re-entered site work so the reader does not have to ask.
Interstate licences: mutual recognition versus automatic mutual recognition
Automatic mutual recognition lets some tradies work in another state after notifying its regulator. Victoria lists NSW, SA, Tasmania, WA, the ACT and the NT as participants and notes that Queensland is not currently participating. Its page does not list electricians among the covered occupations, and NSW says electrical wiring licences are intended to join the scheme on 1 October 2027.
Standard mutual recognition is a separate application. WA's page says licensed individuals from interstate can apply and are deemed registered once they submit, and NSW's East Coast Electricians Scheme recognises some Queensland, Victorian and ACT licences. On your resume, state the licence you hold, the route you used and the date, instead of implying a licence is valid everywhere.
Licences and registration in Australia
- NSW, Victoria, Queensland and WA electrical regulators: NSW issues electrical wiring licences and certificates through Building Commission NSW and Service NSW, Victoria licenses through Energy Safe Victoria and WA through the Electrical Licensing Board. Each state has its own class names, so state the one you hold.
- State construction induction issuers: SafeWork NSW, WorkSafe Victoria, Queensland registered training organisations and WA registered training organisations each issue general construction induction cards under their own rules. WorkSafe Victoria requires a face-to-face course of at least six hours with photo ID.
Rules to know
- Automatic mutual recognition across states: Victoria lists NSW, SA, Tasmania, WA, the ACT and the NT as participants and states that Queensland is not currently participating. Building and plumbing practitioners notify the Building and Plumbing Commission in Victoria, with no fee, and are then treated as licensed or registered there.
- Electrical wiring and automatic mutual recognition in NSW: NSW Government pages say electrical wiring licences are intended to commence under automatic mutual recognition on 1 October 2027, and that licensed electricians from Queensland, Victoria and the ACT can be recognised under the East Coast Electricians Scheme.
- Construction induction card recognition across states: NSW says workers can use construction induction cards issued by other states and territories, and WA regulations recognise nationally accredited induction training conducted elsewhere.
How Australia employers read resumes
- Use A4 and two pages at most; apprentices can use one.
- Group licences by state and regulator, with licence number and expiry for each.
- Add a working-rights line if you are not a citizen, and omit your photo, date of birth and marital status.
- Give two referees with mobile numbers, ideally supervisors from different states if you have worked interstate.
- Write in Australian English and date roles as 'Month YYYY'.
- For FIFO or contract work, add roster patterns and site types so a recruiter can match you to a roster.
Who's hiring
National builders and civil contractors
Large contractors operate across states and often prefer tradies with multi-state credentials.
Resource-sector maintenance contractors
FIFO roles in WA and Queensland frequently list licence and induction checks as entry requirements.
State and territory infrastructure agencies
Public transport, road and health agencies run projects that engage licensed trades through contractors.
Electricity and gas network operators
State-based networks employ licensed electricians and gasfitters.
Labour-hire and trade recruitment agencies
They check credentials against each state's regulator before placement.
Main industries: Construction, Resources and mining, Infrastructure, Utilities, Facilities maintenance.
Terminology
- Automatic mutual recognition
- A scheme under which some licensed workers can work in another participating state after notifying its regulator.
- East Coast Electricians Scheme
- An NSW arrangement recognising some Queensland, Victorian and ACT electrician licences.
- White Card
- Common name for the general construction induction card.
- Deemed registered
- A status in which, once you notify or apply, you are treated as licensed in the new state.
Laying out a resume that works in several states
Build your credentials section as a short table of lines, one per state: regulator, licence name, number, expiry. Put your primary state first. This lets a coordinator in any state find the line that matters to them without hunting.
Then add a recognition line under it. 'Mutual recognition application lodged with [regulator], [month year]' is clearer than vague promises about interstate work.
Contract and FIFO tradies
Contract workers move between employers, so your work history should show contractor name, site type and roster. Recruiters filling shutdown crews check for the exact tickets named on the job advert, so reproduce those names exactly where you hold them.
If you are applying for a role in a state where you are not yet recognised, say when you can start and what you have lodged. Do not claim recognition you have not been granted.
Sources
- Consumer Affairs Victoria: Automatic mutual recognition, accessed 2026-10-12
- NSW Government: Electrical licences and certificates, accessed 2026-10-12
- NSW Government: Automatic mutual recognition - Electrical, accessed 2026-10-12
- SafeWork NSW: White cards, accessed 2026-10-12
- WorkSafe Victoria: Construction induction training (white card), accessed 2026-10-12
- WorkSafe WA: Construction induction training, accessed 2026-10-12
- WA Government: Electrical licensing, accessed 2026-10-12
- QBCC: When you need a licence, accessed 2026-10-12
- Energy Safe Victoria: Electrical workers, accessed 2026-10-12
- Business.gov.au: Electrical work licence, Queensland, accessed 2026-10-12
Frequently asked questions
Is a tradie licence valid across Australia?
No. Licences are issued by states and territories. Automatic mutual recognition lets some trades work in another state after notifying its regulator, but Queensland is not currently participating and not every occupation is covered, so state the licence you hold and the route you used.
Can I use my White Card in any state?
NSW accepts cards issued by other states and territories, and WA recognises nationally accredited induction training from other states. Only the NSW and WA pages confirm this; WorkSafe Victoria's page does not address interstate cards, and it does not allow online courses. Confirm with the local regulator if a site asks for something specific.
Do FIFO tradies need separate resumes for each state?
One resume can work if the credentials section names each state regulator and licence number. Add roster patterns and site types for FIFO roles, and change the first line of your summary to match the state you are applying in.
What do I write if my interstate recognition is still pending?
Give the home licence and expiry, then add a dated line such as 'application for recognition lodged with [regulator], [month year]'. Recruiters generally prefer honest status to an unclear claim.
How we write these guides
- We take rules from official sources such as regulators and government agencies, not from other career advice sites.
- Every fact is checked against its source and carries a date. Sources are listed on the page.
- We update a guide when the rules change, and the last updated date shows when we last did.
Written by Resumatica Team. Last updated 2026-10-12.
Key takeaways
Write the issuing regulator in full for every credential, since licence names differ by state.
List licences held in different states as separate lines with state and expiry date.
Say how your White Card was issued and when you last worked on a construction site.
State your interstate recognition route and date; do not imply a licence is valid in every state.
Queensland is outside automatic mutual recognition, and electrical work is not yet covered in NSW.
Templates
Professional templates, ready to use
Choose from 8+ ATS-optimised, professionally designed resume templates. Fully customisable and downloadable as a pixel-perfect PDF.
Browse all templatesReady to build your tradie resume?
Use our free resume builder with professional, ATS-optimised templates. Download as PDF in minutes.