Skip to content

Resume example and regional guide

Top Tradie Resume Template for Western Australia Job Seekers

Western Australian employers, from Perth builders to resource-sector contractors hiring on rosters, check a short list of credentials.

Tradie resume example

Electrical work is licensed by the Electrical Licensing Board, plumbing by the Plumbers Licensing Board, both serviced by the Building and Energy division of the state department, and the construction induction card, still called the blue card or white card, is issued by a registered training organisation. WA has its own rules on how long a card stays valid and how interstate training is recognised. This guide shows how to write each credential so a supervisor in Perth, Kalgoorlie or Karratha can confirm your standing.

Liam Okafor

Tradie

Professional Summary

Licensed electrician with 8 years' experience in Perth commercial fit-out and FIFO maintenance on resource sites. Holds a Western Australian electrician licence covering all electrical work, a current construction induction card and a working at heights ticket. Comfortable on 2:1 and 8:6 rosters with shutdown and fixed plant experience.

Experience

Fixed Plant Electrician (FIFO)
2023 - Present

Pilbara Maintenance Services

  • Maintain motor control centres and conveyor drives on a 2:1 roster at an iron ore processing site.
  • Complete isolations under permit and verify de-energised before handover to mechanical crews.
  • Join planned shutdowns, replacing contactors and re-terminating VSD cabling.
  • Train new starters on site-specific electrical safety procedures.
Electrician
2019 - 2023

Swan River Electrical

  • Installed lighting, power and data for 20 commercial fit-outs in Perth CBD and Subiaco.
  • Fault found and repaired switchboards in older buildings while tenants stayed in occupation.
  • Supervised one apprentice and signed off weekly tasks.
Electrical Apprentice
2015 - 2019

Fremantle Installations

  • Worked on domestic and light commercial installs under licensed supervision.
  • Completed Certificate III in Electrotechnology (Electrician) while employed.

Education

Certificate III in Electrotechnology (Electrician)South Metropolitan TAFE · 2019
Electrician's Licence, Lic. No. 000000Electrical Licensing Board, Western Australia · 2019
Construction Induction CardRegistered training organisation, Western Australia · 2022

Skills

Motor Control CentresVSD and Drive MaintenanceShutdown WorkIsolations and Permit-to-WorkFault FindingCommercial Fit-outWorking at HeightsApprentice Supervision

Regional Formatting Standards

Western Australian tradie resumes should be two A4 pages. List the Electrical Licensing Board or Plumbers Licensing Board credential with expiry, the induction card year, and your roster history for FIFO work. Include shutdown and site experience with numbers.

Writing your Western Australian electrical licence correctly

WA's electrical licensing page says electrical work can only be done by qualified people with a licence from the Electrical Licensing Board, and defines electrical work as work on installations, wiring, machines and appliances operating above 50 volts alternating current or 120 volts direct current. An electrician licence is typically issued for one or five years, and some electricians are licensed for all electrical work while others are limited to electrical fitting. Say which you hold.

Contractors are different. A WA electrical contractor licence is valid for one year, and the page says contractor licence numbers start with EC and must appear on business materials. If you run your own business, put the EC number on your resume as well as your personal licence.

Renewal timing matters on a roster. Renewals open 90 days before expiry and run to 30 days after, so recruiters want to see a current expiry date rather than 'licensed'.

Example

“Electrician's Licence (Electrical Licensing Board, WA) - All electrical work - Lic. No. 000000 - expires 03/2030”

Plumbing and gas credentials in WA

Plumbing in WA is licensed under the Plumbers Licensing Act 1995. Business.gov.au lists a plumbing contractor's licence that lasts three years unless surrendered and requires you to be a fit and proper person, to hold a National Police Certificate and a statement of competency, and to already hold a plumbing tradesperson's licence.

Show the order on your resume: tradesperson licence first, then contractor licence with its date. The Plumbers Licensing Board is one of three boards serviced by Building and Energy.

Gas work has its own authorisation. List gas licences separately from plumbing so a supervisor can see you are covered for each.

Construction induction card, blue or white

The WA regulator says both blue and white cards are accepted, and that the card remains valid as long as the holder stays consistently within the construction industry. If the holder leaves construction for two consecutive years or longer, the card becomes invalid. If you have been out of the industry for a long break, say 'Construction induction renewed [year]' rather than relying on an old card.

WA recognises nationally accredited induction training done in other states and territories, so an Eastern states tradie can usually cite their home-state card without repeating the course.

Licences and registration in Western Australia

  • Electrical Licensing Board (Building and Energy, WA): Electrical work can only be done by qualified people holding a licence from the Electrical Licensing Board. An electrician licence is issued for 1 or 5 years according to the WA licensing page (Business.gov.au says up to five years), and an electrical contractor licence is valid for one year with numbers starting EC. Applicants must be fit and proper persons, including a recent police check, and pass the required assessments.
  • Building and Energy, Department of Local Government, Industry Regulation and Safety (plumbing): A plumbing contractor's licence under the Plumbers Licensing Act 1995 lasts three years unless surrendered. Applicants must be fit and proper persons, hold a current National Police Certificate and a statement of competency, and already hold a plumbing tradesperson's licence. The Plumbers Licensing Board is one of three boards serviced by Building and Energy.
  • WorkSafe Western Australia (construction induction): A registered training organisation issues the construction induction card after CPCCWHS1001 training. The card stays valid while the holder remains consistently in the construction industry and becomes invalid after two consecutive years or more out of it. Both blue and white cards are accepted.

Rules to know

  • Electrical work definition: WA defines electrical work as work on installations, wiring, machines and appliances operating at a nominal pressure exceeding 50 volts alternating current or 120 volts direct current. An exemption applies to residential electrical work on your own home or an immediate family member's.
  • Mutual recognition for interstate licence holders: Licensed individuals from interstate and New Zealand can have their licence recognised in WA, but only individuals qualify, not companies or partnerships. Once you submit, you are deemed registered and can work under your existing licence terms, and any conditions on the original licence still apply.
  • WA in automatic mutual recognition: Consumer Affairs Victoria lists Western Australia as a participating state, with the WA regulator named on that page as the Department of Mines, Industry Regulation and Safety, a name the current WA pages replace with the Department of Local Government, Industry Regulation and Safety. Eligibility depends on occupation and state, and the WA mutual recognition page does not confirm electrical work is covered, so check before relying on it.

How Western Australia employers read resumes

  • Use A4 and two pages; one page suits apprentices.
  • Show the licence type, number and expiry, and say whether it covers all electrical work or electrical fitting only.
  • For FIFO roles, add roster patterns such as 2:1 or 8:6, the site type and your fly-in point.
  • Leave out your photo and date of birth; add a work rights line if you are not a citizen.
  • Give two referees, ideally a recent supervisor, and tell them to expect a call.
  • Use Australian spelling and 'Month YYYY' dates, and mention any plain-text ticket names for recruiter databases.

Who's hiring

  • Resource-sector operators and maintenance contractors

    Iron ore, gold and lithium operations hire electricians for fixed plant, shutdowns and rosters.

  • Oil and gas operators and service contractors

    Offshore and onshore facilities need licensed electrical and instrument tradespeople.

  • Western Power and regional utilities

    Network operators with ongoing distribution and maintenance work.

  • METRONET and other Perth infrastructure projects

    Rail and road projects delivered through major contractors.

  • Perth commercial and residential builders

    Subcontracted electrical and plumbing teams for housing and fit-out.

  • Licensed electrical and plumbing contractors in regional centres

    Small businesses in places such as Bunbury, Geraldton and Kalgoorlie.

Main industries: Mining and mineral processing, Oil and gas, Perth construction, Utilities, Regional maintenance.

Terminology

Electrical Licensing Board
The WA board that licenses electrical workers and contractors.
EC number
The prefix of a WA electrical contractor licence number, which must appear on business materials.
Plumbers Licensing Board
The WA board serviced by Building and Energy that handles plumber licensing under the Plumbers Licensing Act 1995.
Blue card
The older design of construction induction card, still accepted alongside the white card in WA.
CIT card database
WorkSafe WA's construction induction training card database, used to find the training provider that issued your card.

Presenting FIFO and roster experience

Resource-sector recruiters in Perth screen for roster experience as much as the licence. State the roster you worked, the type of site and the kind of work, for example 'Fixed plant electrician on a 2:1 roster, iron ore processing, motor control centres and drives'.

List shutdown participation separately from routine maintenance. A supervisor planning a shutdown wants to know you have completed isolations under permit, not just general electrical work.

Moving to WA from another state

WA's electrical licensing is separate from the Eastern states, so state the licence you hold and the WA recognition you applied for. WA mutual recognition pages say you are deemed registered once you submit and that your original licence conditions still apply, so note any restrictions.

For plumbing and gas, check whether your occupation falls under automatic mutual recognition. WA is a participating state according to Consumer Affairs Victoria, but the WA pages do not confirm every trade, so write only what you have actually lodged.

Sources

Frequently asked questions

What does a WA electrician need on a resume?

The licence type and number, its expiry date and whether it covers all electrical work or only electrical fitting. WA says electricians are typically licensed for one or five years, and the work must be done through a licence from the Electrical Licensing Board.

Do I list an EC number on my resume?

If you are a contractor, yes. The WA electrical licensing page says electrical contractor licence numbers start with EC and must appear on business materials. Employees on a personal electrician licence do not need one.

Does my interstate construction card work in WA?

WorkSafe's guidance says WA regulations recognise nationally accredited construction induction training conducted in other states and territories, so workers who can show they completed it elsewhere do not need to take the WA course. Both blue and white card designs are accepted.

Can an interstate electrician use mutual recognition in WA?

WA's mutual recognition page says licensed individuals from interstate and New Zealand can apply for recognition, that it applies to individuals rather than companies, and that you are deemed registered and can start working once you submit. It also says conditions on your original licence still apply. Check whether your occupation falls under automatic mutual recognition before assuming it does.

How we write these guides

  • We take rules from official sources such as regulators and government agencies, not from other career advice sites.
  • Every fact is checked against its source and carries a date. Sources are listed on the page.
  • We update a guide when the rules change, and the last updated date shows when we last did.

Written by Resumatica Team. Last updated 2026-10-12.

Key takeaways

Name the board: Electrical Licensing Board for electricians and contractors, Plumbers Licensing Board for plumbers.

Show your licence expiry and renewal status; electrician licences are typically one or five years.

Contractors should add their EC licence number, since WA requires it on business materials.

Explain any gap in construction work, because a construction induction card lapses after two consecutive years out of the industry.

Interstate trainees should state the home-state licence and the WA recognition they have applied for.

Templates

Professional templates, ready to use

Choose from 8+ ATS-optimised, professionally designed resume templates. Fully customisable and downloadable as a pixel-perfect PDF.

Browse all templates

Ready to build your tradie resume?

Use our free resume builder with professional, ATS-optimised templates. Download as PDF in minutes.